(86) 21-64786005

我们致力于为中国出口企业提供包括产品安全检测及产品认证的全球市场准入服务。

(86) 21-64786005
QQ:2668296810;2642459549

http://www.aurumcert.com

Email:inquiry@aurumcert.com

  上海诺证检测
CE认证专题
首页行业资讯CE认证专题

焊丝,焊条, 焊棒等焊材CE认证

来源:| 发布时间:2017-9-25 13:25:43|285 次浏览

焊接材料或焊材是指焊接时所消耗材料的通称,例如焊条、焊丝、金属粉末、焊剂、气体、电极、衬垫等。不同的母材和焊接方法适用焊材也不一样,欧盟针对不同材质、不同应用的焊材制定了相应的技术规范标准。焊材出口欧盟各成员国时,需要通过CE认证。

 

焊接成品最终应于建筑用途时,需按依据欧盟建筑建材法规Regulation (EU) No 305/2011 Construction Products (CPD/CPR)申请CE认证,此外,欧洲标准具有分类较细、针对性较强的特点,在应用时注意其前提条件,例如采用手工电弧焊接结构钢时的焊条标准有EN499、EN757, EN499适用于材料屈服强度≤500Mpa的强度结构用钢,而EN757适用于材料屈服强度>500Mpa的强度结构用钢。如:通用焊材CE认证标准为:EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准。

 


关于金属熔焊焊材CE认证标准 EN 13479

1.     CPR 认证模式:System 2+

2.     认证要求:工厂生产管控(FPC)+型式试验+初始工厂审核+监督审核

3.     主要产品测试参数:

l  Tolerances on dimensions 尺寸公差

l  Elongation 拉伸性能

l  Tensile strength抗拉强度

l  Yield strength 屈服强度

l  Impact strength 冲击强度

l  Chemical composition 化学成分

l  Durability 耐久性

l  Dangerous substances 有害物质试验

 

其他焊接材料欧盟标准

EN 1011-3:2000/A1:2003 Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels

EN 14532-1:2004 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys

EN 14532-3:2004 Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys

EN 14700:2014 Welding consumables - Welding consumables for hard-facing

EN ISO 1071:2015 Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)

EN ISO 12153:2012 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011)

EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels

EN ISO 14172:2015 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)

EN ISO 14175:2008 Welding consumables - Gases and gas mixtures for fusion welding and allied processes (ISO 14175:2008)

EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)

EN 12536:2000 Welding consumables - Rods for gas welding of non alloy and creep-resisting steels – Classification

 

更多信息,请联系:诺证检测技术(上海)有限公司 Tel: 021-64786005; Mobile: 13564831906